Platforms and end-products – Förderung EU-weit

Expected Impact: Projects are expected to deliver results aligned with the expected results set out in this call topic and to evidence their contribution through dedicated KPIs defined in the proposal. Expected results include: • tangible capacity increases in EU-based production enabling the ramp-up of the targeted platforms or end-products, with demonstrated contribution to competitiveness; • improved resilience & geographical distribution of supply and industrial capability, reducing single points of failure across forging/machining, key sub-systems, composites and assembly/integration; • strengthened availability and security of supply of the targeted platforms or end-products with identified risks and exposure to the risk of materialisation of conventional military threats; • and measurable lead-time reductions, establishment or availability of reserved capacity where applicable, and workforce trained to operate and sustain the reinforced production lines (including, where relevant, MaaS and dual-use conversion pathways). Proposals shall define, baseline and track KPIs such as added throughput (e.g., units/month of platforms/end-products or critical sub-systems; tonnes/month or batches for forging/machining/composites where relevant), time-to-rate, lead-time reduction, yield/quality improvements, qualified output delivered, reserved capacity parameters, numbers of staff trained, and indicators evidencing risk mitigation (e.g., supply-chain robustness, integration maturity, maintainability readiness and obsolescence management outcomes). Where implemented, the physical and cyber protection WP is expected to deliver measurable improvements in site and production security, evidenced through threat assessment protected sites to support the security measures and KPIs (e.g., coverage of protected areas/assets, detection/alert performance, response readiness, critical vulnerabilities mitigated). Those KPIs shall be linked to the project’s overall risk register and show how risk exposure is reduced and how production continuity is improved, thereby limiting the likelihood and/or impact of incidents that could delay production ramp-up or affect output and delivery reliability (including, where relevant, the availability of reserved capacity and the achievement of workforce-related milestones) Objective: This topic aims to strengthen the competitiveness, responsiveness and ability of the EDTIB to reinforce EU industrial production capacity for key platforms and end-products, across land, air, naval and underwater domains: • artillery systems; • armoured vehicles (including special purpose and support vehicles); • fixed and rotary wing aircraft; • (counter-)UxS systems (including loitering munition); • (anti-)PGM systems (including (anti-)missile systems); • radars; • mine warfare systems (including minelaying and mine countermeasures in both naval and land domains); • surface and underwater naval platforms (including torpedoes); • firearms; • satellite payloads and terminals. Actions shall be aligned with the objectives, scope and priorities of this call topic and shall contribute to the competitiveness of the EU defence technological and industrial base by securing specific production capacity for: • forging/machining; • key sub-systems; • composites materials; • assembly/integration of end products; • MaaS (Manufacturing as a Service); • dual-use (heavy) industry conversion options for defence surge. As industrial reinforcement actions, proposals shall integrate a robust approach to managing key risks (including safety, supply-chain and obsolescence, life-cycle and maintainability, and industrialisation), shall demonstrate the criticality of reinforcing the availability and security of supply for the specific targeted platforms or end-products and shall, where relevant, take into account the necessity to include provisions allowing to upgrade quickly the targeted platforms or end-products based on the evolving lessons identified from the battlefield. Applicants may include an optional dedicated WP implementing a supporting action as defined in Article 13(d) of Regulation (EU) 2025/2643, to reinforce the physical and cyber protection of the production capacity targeted by the action, including on security against UxS/drone-enabled threats. The objective is to reduce the risk of disruption, sabotage or interference affecting production continuity, ramp-up and deliveries, complementing the proposal’s overall risk-management approach (notably safety, supply-chain and obsolescence, industrialisation/integration, and maintainability risks) and supporting the achievement of the industrial KPIs set for lead time and capacity. Scope: Proposals shall implement Industrial Reinforcement Actions, in line with Regulation (EU) 2025/2643, targeting the specific defence product and production capacities listed under “Objectives pursued”. Proposals shall demonstrate the criticality of the targeted platforms or end-products and justify the urgency of reinforcing their availability and security of supply through the proposed industrial reinforcement activities. Proposals shall set out an industrial reinforcement plan supported by a risk-management approach that addresses the identified risks and the measures to ensure availability and security of supply, including industrialisation and integration risks relevant to platform-level ramp-up (e.g., qualification, integration bottlenecks, maintainability, and critical sub-system dependencies). Activities linked to the physical and cyber protection WP may include expert threat assessment, procurement, installation and initial integration of proportionate solutions as well as efforts to connect to a national or European security system for: (i) counter-UxS site protection measures (detection/alerting and other authorised protective measures), and/or (ii) cyber protection measures of production-relevant networks and systems (including monitoring, hardening and secure access) which includes obtaining the European Union Cybersecurity Certification (EUCC) schemes for products used in the IRA activity, as well as acceptance testing and operational set-up necessary for effective deployment, in order to work towards compliance with the NIS2 Directive, where applicable, and alignment with standards such as ISO/IEC 27001 and IEC 62443. Where implemented, the physical and cyber protection WP shall clearly specify the protected assets, threat assessment for the to be protected sites to support the security measures, interfaces with production continuity and KPIs, explain how these measures reduce risks that could otherwise impact the delivery of the proposal’s core industrial results (e.g., lead-time reduction, throughput/capacity increase, reserved capacity where applicable, and workforce readiness) and present efforts to link the respective site’s security system with a national and/or European security system. Actions shall not have started before 5 March 2024 and shall not have been completed before the signature of the Grant Agreement (GA). The duration and the starting date of the action will be set out in the GA. The action shall have an indicative duration of three to five years; in any event, it shall be completed no later than 31 December 2033. ">Conditions 1. Admissibility conditions: Proposal page limit and layout described in section 5 of the call document . Proposal page limits and layout: described in Part B of the Application Form available in the Submission System. 2. Eligible countries described in section 6 of the call document. 3. Other eligibility conditions described in section 6 of the call document. 4. Financial and operational capacity and exclusion described in section 7 of the call document. 5a. Evaluation and award: Submission and evaluation processes described section 8 of the call document and the Online Manual. 5b. Evaluation and award: Award criteria, scoring and thresholds described in section 9 of the call document. 5c. Evaluation and award: Indicative timeline for evaluation and grant agreement described in section 4 of the call document. 6. Legal and financial set-up of the grants described in section 10 of the call document. Call document and annexes: Call document Application form templates Application Form (EDIP and USI) Detailed Budget Table (EDIP LS) Participant Info (EDIP and USI) List of Infrastructure, facilities, assets and resources (EDIP and USI) Ownership Control Declaration Procurement Strategy (EDIP and USI) Model Grant Agreements (MGA) EDF, ASAP, EDIRPA, EDIP and USI Lump Sum MGA Additional documents: EDIP Work Programme EDIP Regulation 2025/2643 EU Financial Regulation 2024/2509 Rules for Legal Entity Validation, LEAR Appointment and Financial Capacity Assessment EU Grants AGA — Annotated Model Grant Agreement Funding & Tenders Portal Online Manual Funding & Tenders Portal Terms and Conditions Funding & Tenders Portal Privacy Statement